Installing The Supply Hose - Toro Multi Pro 1750 Installation Instructions Manual

1. Flange
(right-boom-section valve)
2. Gasket
Installing the Supply Hose—Machines
with the Optional Spray Gun Kit
1. Apply PTFE tape to the threads
straight barbed fitting (1/2 inch).
1. PTFE tape
2. Assemble the straight barbed fitting (1/2 inch) into the
quick-connect fitting (socket) as shown in
Figure 89
3. Flange clamp
4. 90° elbow (with pressure
port)
(Figure 91) of the
Figure 90
2. Straight barbed fitting (1/2
inch)
Figure
1. Hose—1.3 x 762 cm (1/2 x
300 inches)
2. Hose clamp
3. Assemble the hose—1.3 x 762 cm (1/2 x 300 inches)
with a hose clamp 6 to 11 mm (1/4 to 7/16 inch) onto
the straight barbed fitting
4. Assemble the quick-connect fitting (socket) of the hose
to the quick-connect fitting of the flange shutoff valve
(Figure 92).
91.
1. Quick-connect fitting
(flange shutoff valve)
2. Hose—1.3 x 762 cm (1/2 x
300 inches)
5. Secure the quick-connect fittings of the hoses and the
flange shutoff valve with the retainer provided with the
quick-connect fitting of the hose
6. Route the supply hose forward along the sprayer tank
toward the spray-gun bracket, and secure the hose to
the tank frame with the 3 cable ties
43
Figure 91
3. Straight barbed fitting (1/2
inch)
4. Quick-connect fitting
(socket)
(Figure 91).
Figure 92
3. Retainer
4. Quick-connect fitting
(socket)
(Figure 92).
(Figure 93).