Preparing To Install The Kit; Preparing The Sprayer Tank And Optional Rinse Tank; Preparing The Sprayer And Optional Rinse Tank Kit - Toro Multi Pro 1750 Installation Instructions Manual

1

Preparing to Install the Kit

No Parts Required
Preparing the Sprayer Tank and
Optional Rinse Tank
1. Park the machine on a level surface.
2. Engage the parking brake.
3. Shut off the engine and remove the key.
Preparing the Sprayer and Optional
Rise Tank Kit
1. Clean the sprayer; refer to Cleaning the Sprayer in the
Operator's Manual for the machine.
Important: You must completely empty the
sprayer tank before installing the Valve Conversion
Kit.
2. For machines with the optional tank-rinse kit,
perform the following: Pump the water from the
rinse tank into the sprayer tank; refer to Operating
the Rinse Kit in the Installation Instructions for the
Tank-Rinse Kit.
3. Drain the water from the sprayer tank
to Cleaning the Sprayer in the Operator's Manual for the
machine.
Figure 1
(Figure
1. Valve bracket
2. Mount bolt
2); refer
5
Figure 2
3. Drain valve