Removing The Agitation, Rate, And Master-Spray Valves From The Machine - Toro Multi Pro 1750 Installation Instructions Manual

Figure 24
1. Retainer
2. 90° barbed fitting (sprayer
supply hose)
3. Front of the machine
4. Remove the 90° barbed fitting from the T-fitting
(Figure 24).
5. At the top of the of the sprayer tank, remove the
retainer that secures the straight barbed fitting of the
bypass hose to the T-fitting
Note: Retain the retainers for installation in
the Bypass Hose—Machines without the Optional
Spray Wand Kit or Electric Hose Reel Kit (page
Figure 25
1. Retainer
2. T-fitting
4. T-fitting
5. Pressure-relief valve
(Figure 25).
Installing
33).
3. Straight barbed fitting
(bypass hose)
6. Remove the straight barbed fitting from the T-fitting
(Figure 25).
Removing the Agitation, Rate, and
Master-Spray Valves from the Machine
1. While supporting the bracket for the agitation, rate,
and master-spray valves, remove the 3 flange-head
bolts (5/16 x 3/4 inch) that secure valve bracket to the
mount (Figure 26).
1. Mount
2. Bracket
2. Remove the bracket, valves, hoses, and agitation
nozzles from the machine
Note: Retain the 3 flange-head bolts (5/16 x 3/4 inch)
for installation in
Master-Spray Valve Manifold (page
need the bracket, valves, hoses, and agitation nozzles.
15
Figure 26
3. Flange-head bolts (5/16 x
3/4 inch)
(Figure 27).
Installing the Agitation, Rate, and
24); you no longer
Figure 27