Toro Multi Pro 1750 Installation Instructions Manual page 46

Installing the Section Bypass
Hose—Machines with the Optional
Spray Gun Kit or the Optional Electric
Hose Reel Kit
1. Assemble the bypass shutoff valve to the quick-connect
socket of the bypass manifold
retainer that you removed in step
the Section Bypass Valves (page
Note: Ensure that the handle of the bypass shutoff
valve is aligned as shown in
Figure 99
1. Bypass
manifold—quick-connect
socket
2. Bypass shutoff valve
3. 90° quick-connect fitting
2. Assemble the 90° quick-connect fitting of the section
bypass hose—2.5 x 146 cm (1 x 57-1/2 inches) onto
the quick coupling of the bypass shutoff valve with the
retainer (small) that is supplied with the section bypass
hose (Figure 99).
3. Route the section bypass hose around the right frame
channel toward the bulkhead fitting in the sprayer tank
as shown in Figure
(Figure 99) with the small
1 of Repositioning
40).
Figure 99.
4. Retainer (small)
5. Section bypass hose—2.5
x 146 cm (1 x 57-1/2
inches)
100.
1. Retainer (large)
2. 90° barbed fitting
4. Assemble the 90° barbed fitting of the section bypass
hose into the bulkhead fitting
5. Secure the 90° fitting to the bulkhead fitting
100) with the retainer (large) that you removed in step
1 of Removing the Section Bypass Hose (page
46
Figure 100
3. Bulkhead fitting (sprayer
tank)
4. Section bypass hose
(Figure 100).
(Figure
16).