Toro Multi Pro 1750 Installation Instructions Manual page 44

Figure 93
7. Assemble the barb of the spray gun
you removed in Disconnecting the Optional Hand
Spray-Wand Kit (page 10)
hose clamp 6 to 11 mm (1/4 to 7/16 inch).
Figure 94
1. Supply hose
2. Hose clamp
8. Place the spray gun in the spray-gun bracket, and hose
onto the hose hook.
(Figure 94) that
to the supply hose with a
3. Hose barb (spray gun)
Installing the Supply Hose—Machines
with the Optional Electric Hose-Reel Kit
1. Assemble the straight barbed fitting (3/4 inch) that you
removed in step
the Optional Spray Gun Kit or the Electric Hose Reel
Kit (page 42) to the hose—1.3 x 180 cm (1/2 x 71
inches) with a hose clamp 13 to 32 mm (1/2 to 1-1/4
inches) as shown in
1. Straight barbed fitting (3/4
inch)
2. Hose clamp
2. Assemble the straight barbed fitting of the hose to
the quick-connect fitting of the flange shutoff valve
(Figure 96).
44
3 of Installing the Shutoff Valve for
Figure 95.
Figure 95
3. Hose—1.3 x 180 cm (1/2
x 83 inches)