Installing The Lower Sprayer Supply Hose - Toro Multi Pro 1750 Installation Instructions Manual

Installing the Lower Sprayer Supply
Hose—Machines with the Optional
Eductor Kit
1. Assemble the straight barbed fitting of the lower supply
hose—25 x 66 cm (1 x 25-3/4 inches) into the port of
the eductor-shutoff valve
Figure 73
1. Retainer (small)
2. Port (eductor-shutoff
valve)
2. Secure the barbed fitting to the port with a retainer
3. Route the sprayer supply hose down and toward the
T-fitting located forward of the pressure-relief valve as
shown in Figure 74.
Figure 74
1. Lower supply hose—25 x 66 cm (1 x 25-3/4 inches)
(Figure 73).
3. Straight barbed fitting
4. Lower supply hose—25 x
66 cm (1 x 25-3/4 inches)
machines with the optional
eductor kit
4. Assemble the 90° barbed fitting of the sprayer supply
hose into the forward, left T-fitting
1. Retainer
2. 90° barbed fitting (sprayer
supply hose)
3. Lower supply hose—25 x
66 cm (1 x 25-3/4 inches)
5. Secure the barbed fitting to the T-fitting with the
retainer that you removed in step
the Return, Sprayer-Supply, and Bypass Hoses (page
14).
36
(Figure 75).
Figure 75
4. Front of the machine
5. T-fitting
6. Pressure-relief valve
3 of Disconnecting