Installing The Agitation-Nozzle Assembly And Hoses - Toro Multi Pro 1750 Installation Instructions Manual

2. Assemble the agitation-valve bracket to the mount for
the throttle-valve bracket
bolts (5/16 x 3/4 inch).
3. Torque the flange-head bolts to 1978 to 2542 (175 to
225 in-lb).
Assembling the Throttle Valve and
Eductor-Shutoff Valve for Machines
with the Optional Eductor Kit
1. Align the slots in the agitation-throttle bracket and the
slots in the eductor-shutoff bracket with the holes in
the mount for the throttle-valve bracket
Figure 61
1. Agitation throttle bracket)
2. Bracket (throttle valve)
3. Eductor-shutoff bracket
2. Assemble the agitation-valve bracket and
eductor-shutoff bracket to the mount for the
throttle-valve bracket
bolts (5/16 x 3/4 inch).
3. Torque the flange-head bolts to 1978 to 2542 (175 to
225 in-lb).
(Figure 60) with 2 flange-head
(Figure
4. Flange-head bolt (5/16 x
3/4 inch)
5. Front of the machine
(Figure 61) with 2 flange-head
13
Installing the Agitation-Nozzle
Assembly and Hoses
Parts needed for this procedure:
1 Agitation-nozzle assembly
61).
Procedure
1. Insert the 3 agitation nozzles of the agitation-nozzle
assembly into the bulkhead fittings of the sprayer tank
(Figure 62).
1. Agitation nozzle
(agitation-nozzle
assembly)
2. Retainer
2. Secure the agitation nozzles with the 3 retainers
62) that you removed in step
Agitation Nozzles from the Sprayer Tank (page
3. Assemble the 90° quick-connect fitting of the
agitation-nozzle assembly onto the quick coupling of
the agitation throttle valve with the retainer that is
supplied with the agitation-hose assembly
30
Figure 62
3. Agitation-nozzle assembly
4. Bulkhead fitting
1 of Removing the
(Figure
(Figure
13).
63).