Installing The Flow Meter - Toro Multi Pro 1750 Installation Instructions Manual

Installing the Flow Meter

1. Align the flow meter to the reducer adapter at the left
spray valve with the arrow of the flow meter pointing
right (Figure 53).
Figure 53
1. Arrow
2. Flow meter
3. Flange clamp
2. Assemble the flow meter to the reducer adapter with
the gasket and flange clamp
removed in step 2 and
from the Valve Manifolds (page
3. Assemble quick-connect fitting of the flow-meter hose
with the quick-connect fitting at the master-spray valve
(Figure 54).
4. Gasket
5. Reducer adapter (left
spray valve)
(Figure 53) that you
3 of Removing the Flow Meter
12).
1. Quick-connect fitting
(master-spray valve)
2. Quick-connect fitting
(flow-meter hose)
4. Secure the hose fitting to the valve fitting with the
retainer (Figure
hose.
5. Align the barbed flange fitting of the flow-meter hose
and the gasket that you removed in step
the Flow Meter from the Valve Manifolds (page 12)
with the flange at the inlet of the flow meter
1. Flange (flow meter)
2. Barbed flange fitting
6. Secure the flow-meter hose to the flow meter with
a clamp (Figure
Removing the Flow Meter from the Valve Manifolds
(page 12)
26
Figure 54
3. Retainer
4. Flow-meter hose
54) that is provided with the flow-meter
3
Figure 55
3. Gasket
4. Flange clamp
55) that you removed in step
of Removing
(Figure 55).
1 of