Output Data : Mvout - Mitsubishi Electric Melsec Q Series Programming Manual

5 OPERATION CONTROL PROGRAMS

5.15.6 Output data : MVOUT

Format
[Usable data]
Setting
16-bit
data
Bit device
integer
type
(S1) —
(Note-2)
(S2) —
(Note-3)
(S3) —
(S4) —
[Setting data]
Setting data
[Functions]
Ver.!
MVOUT(S1), (S2), (S3), (S4)
(Note-1)
Word device
64-bit
32-bit
floating
integer
point
type (L)
type (F)
— —
— —
(Note-3) (Note-3)
— —
(Note-1): The special register (SD) cannot be used.
(Note-2): Specify the start device which stores the character string data. The character string can be specified directly.
(Note-3): Data is the same format as data to be transferred. The character string can be specified directly.
(S1)
Vision system (camera) No. to transfer data (1 to 8)
(S2)
Spreadsheet cell or tag to transfer data
(S3)
Timeout time until data is transferred to vision system
(S4)
(1) Data specified with (S3) is transferred to spreadsheet cell or tag specified with
(S2) of vision system specified with (S1).
(2) The Motion SFC program execution transits to the next block without waiting for
the process completion. After process completion, the status storage device value
set in the Ethernet communication line setting parameter is 20 (reception enabled).
(Refer to APPENDIX 3.2.)
Ver.!
: Refer to Section 1.3 for the software version that supports this function.
Usable Data
Constant
16-bit 32-bit
Coasting
integer integer type
timer
type (K/H) (K/H, L)
— —
— — —
(Note-3) (Note-3)
—
— —
Description
Data to be transferred
(1 to 32767) [ 10ms]
5 - 137
F/FS
Number of basic steps
Bit
64-bit
Calculation
conditional
floating
expression
expression
point
type (K)
— — —
— — —
(Note-3)
— —
— — —
Data type of result
—
G
8 or more
Comparison
conditional
expression
—
—
—
—
: Usable