Mitsubishi Electric Melsec Q Series Programming Manual page 32

1 OVERVIEW
Table of the operation control/transition control specification (continued)
Item
(None)
Data type L
F
K
Constant
H
Binary operation
Bit operation
Sign
Standard function
Type conversion
Bit device status
Bit device control
Logical operation
Number of
Comparison operation
instructions
Motion dedicated function
Others
Vision system dedicated
function
Data control
Program control
Synchronous control
dedicated function
Read/write response Input response
of input PX, output PY
Output response
16-bit integer type (signed)
16-bit integer type (unsigned)
32-bit integer type (signed)
32-bit integer type (unsigned)
64-bit floating-point type
(double precision real number type)
Decimal
The above data type symbol 'L' or '. (decimal point)' provided at the end
constant
indicates the data type. The constant without the data type is regarded
Hexadecimal
as the applicable minimum type.
constant
6
6
1
15
8
2
5
4
6
5
12
9
2
4
5
Specifications
-32768 to 32767
0 to 65535
-2147483648 to 2147483647
0 to 4294967295
IEEE format
90 in total
Direct read control at instruction execution.
Direct write control at instruction execution.
1 - 9
Remark
K10, D100, etc.
2000000000, W100L, etc.
1.23, #10F, etc.
K-100, H0FFL, etc.
'K' may be omitted.