Mitsubishi Electric Melsec Q Series Programming Manual page 270

5 OPERATION CONTROL PROGRAMS
POINT
It is converted into a large data type to operate the binary operations with a different
data type. Therefore, ULONG does not become valid.
The target binary operations are shown below.
• Addition (+)
• Subtraction (-)
• Multiplication ( )
• Division (/)
[Example] W0:F=#0F+ULONG(D0L)
64-bit floating point type
• Remainder (%)
• Bit logical AND (&)
• Bit logical OR (|)
• Bit exclusive logical OR (^)
ULONG does not become valid.
5 - 47