Parameter Set-Up - GE AF-650 GP Programming Manual

How to Program
Operating variable
DR-20 Motor Angle
DR-30 DC Link Voltage
DR-32 Brake Energy /s
DR-33 Brake Energy /2 min
DR-34 Heatsink Temp.
DR-35 Drive Thermal
DR-36 Drive Nominal Current
DR-37 Drive Max. Current
DR-38 Logic Controller State
DR-39 Control Card Temp.
DR-40 Trending Buffer Full
DR-50 External Reference
DR-51 Pulse Reference
DR-52 Feedback[Unit]
DR-53 Digi Pot Reference
DR-60 Digital Input
DR-61 Terminal 53 Switch Setting
DR-62 Analog Input 53
DR-63 Terminal 54 Switch Setting
DR-64 Analog Input 54
DR-65 Analog Output 42 [mA]
DR-66 Digital Output [bin]
DR-67 Freq. Input #29 [Hz]
DR-68 Freq. Input #33 [Hz]
DR-69 Pulse Output #27 [Hz]
DR-70 Pulse Output #29 [Hz]
DR-71 Relay Output [bin]
DR-72 Counter A
DR-73 Counter B
DR-80 Fieldbus CTW 1
DR-82 Fieldbus REF 1
DR-84 Comm. Option STW
DR-85 Drive Port CTW 1
DR-86 Drive Port REF 1
DR-90 Alarm Word
DR-92 Warning Word
DR-94 Ext. Status Word
Table 2.1 Measurements
Status screen I
This read-out state is standard after start-up or initiali-
zation.
Press [Info] to obtain information about the measurement
links to the displayed operating variables (1.1, 1.2, 1.3, 2
and 3).
See the operating variables shown in Illustration 2.10.
AF-650 GP Programming Guide
Unit
V
kW
kW
C
%
A
A
Illustration 2.10 Status screen I
C
Status screen II
See the operating variables (1.1, 1.2, 1.3 and 2) shown in
[Unit]
Illustration 2.11.
In the example, speed, motor current, motor power and
frequency are selected as variables in the first and second.
bin
V
V
[mA]
[bin]
[Hz] Illustration 2.11 Status screen II
[Hz]
[Hz]
Status screen III
[Hz]
This state displays the event and action of the Logic
Controller. For further information, see 3.19 LC-## Logic
Controller.
hex
hex
hex
hex
hex
Illustration 2.12 Status screen III

2.1.5 Parameter Set-Up

The frequency converter can be used for practically all
assignments, which is why the number of parameters is
quite large. The frequency converter offers a choice
between two programming modes - a Main Menu and a
Quick Menu mode.
The former provides access to all parameters. The latter
takes the user through a few parameters making it
possible to start operating the frequency converter.
Change a parameter in either Main Menu mode or Quick
Menu mode.
DET-618C
2 2
17