GE AF-650 GP Programming Manual page 124

Parameter Descriptions
LC-10 Comparator Operand
Array [6]
Option: Function:
[131] Digital input DI19 Digital input 19. High = True.
[132] Digital input DI27 Digital input 27. High = True.
[133] Digital input DI29 Digital input 29. High = True.
[134] Digital input DI32 Digital input 32. High = True.
[135] Digital input DI33 Digital input 33. High = True.
[150] Logic Controller Use the result of the Logic Controller
digital output A output A.
[151] Logic Controller Use the result of the LC output B.
digital output B
[152] Logic Controller Use the result of the LC output C.
digital output C
[153] Logic Controller Use the result of the LC output D.
digital output D
[154] Logic Controller Use the result of the LC output E.
digital output E
[155] Logic Controller Use the result of the LC output F.
digital output F
[160] Relay 1 Relay 1 is active
[161] Relay 2 Relay 2 is active
[180] Local referecnce High when F-02 Operation Method =
active [2] Local or when F-02 Operation
Method is [0] Linked to hand Auto, at
the same time as the keypad is in
Hand mode.
[181] Remote reference High when F-02 Operation Method= [1]
active Remote or [0] Linked to hand/auto,
while the keypad is in Auto mode.
[182] Start command High when there is an active start
command, and no stop command.
[183] Drive stopped A stop command (Jog, Stop, Qstop,
Coast) is issued – and not from the
Logic Controller itself.
[185] Drive in hand High when the frequency converter is
mode in hand mode.
[186] Drive in auto High when the frequency converter is
mode in auto mode.
[187] Start command
given
[190] Digital input x30 2
[191] Digital input x30 3
[192] Digital input x30 4
AF-650 GP Programming Guide
LC-11 Comparator Operator
Array [6]
Option:
[0] <
[1] ≈ (equal)
*
[2] >
[5] TRUE longer
than..
[6] FALSE longer
than..
[7] TRUE shorter
than..
[8] FALSE
shorter
than..
LC-12 Comparator Value
Array [6]
Range:
0 [-100000 -
*
100000]
LC-15 RS-FF Operand S
Option:
[0]
*
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
[10]
[11]
[12]
[13]
[14]
[15]
DET-618C
Function:
Select [0] < for the result of the evaluation to
be TRUE, when the variable selected in
LC-10 Comparator Operand is smaller than
the fixed value in LC-12 Comparator Value.
The result will be FALSE, if the variable
selected in LC-10 Comparator Operand is
greater than the fixed value in
LC-12 Comparator Value.
Select [1] ≈ for the result of the evaluation to
be TRUE, when the variable selected in
LC-10 Comparator Operand is approximately
equal to the fixed value in LC-12 Comparator
Value.
Select [2] > for the inverse logic of option [0]
<.
Function:
Enter the 'trigger level' for the variable
that is monitored by this comtor. This is
an array parameter containing comtor
values 0 to 5.
False
True
Running
In range
On reference
Torque limit
Current Limit
Out of current range
Below I low
Above I high
Out of speed range
Below speed low
Above speed high
Out of feedb. range
Below feedb. low
Above feedb. high
3 3
Function:
123