GE AF-650 GP Programming Manual page 104

Parameter Descriptions
EN-14 Link Duplex
Option: Function:
Forces the duplex for each port to Full or Half
duplex. If EN-12 Auto Negotiation is set to:
[ON], this parameter is read only.
[0] Half Duplex
[1] Full Duplex
*
EN-20 Control Instance
Range: Function:
[None, 20, 21, 23, Read only. Displays the connection to
100, 101, 103] the master. In Ethernet/IP: If no CIP
connection is present, "None" is
displayed.
EN-21 Process Data Config Write
Range: Function:
[[0 - 9] PCD read 0 - 9] Configuration of readable process
data.
EN-22 Process Data Config Read
Range: Function:
[[0 - 9] PCD read 0 - 9] Configuration of readable process
data.
EN-28 Store Data Values
Option: Function:
This parameter activates a function that stores
all parameter values in the non-volatile
memory (EEPROM) thus retaining parameter
values at power-down.
The parameter returns to "Off".
[0] Off The store function is inactive.
*
[1] Store All All parameter value will be stored in the non-
set-ups volatile memory, in all four setups.
EN-29 Store Always
Option: Function:
Activates function that always stores received
parameter data in non-volatile memory (EEPROM).
[0] Off
*
[1] On
AF-650 GP Programming Guide
EN-30 Warning parameter
Range:
[0000–
FFFF hex]
EN-31 Net Reference
Option:
[0] Off Reference from the network is not active.
*
[1] On Reference from the network is active.
EN-32 Net Control
Option:
[0] Off Control via the network is not active.
*
[1] On Control via the network is active
EN-33 CIP Revision
Option:
[0] Major version (00 - 99)
[1] Minor version (00-99)
EN-34 CIP Product Code
Range:
1100 (AF-650 GP) 1110
(AF-650 GP)
DET-618C
Function:
Read only. Displays the Ethernet/IP specific 16-bit
Status-word.
Bit Description
0 Owned
1 Not used
2 Configured
3 Not used
4 Not used
5 Not used
6 Not used
7 Not used
8 Minor recoverable fault
9 Minor unrecoverable fault
10 Major recoverable fault
11 Major unrecoverable fault
12 Not used
13 Not used
14 Not used
15 Not used
Table 3.27
Function:
Read only. Displays the reference source in Instance
21/71.
Function:
Read only. Displays the control source in Instance
21/71.
Function:
Read only. Displays the CIP-version of
the option software.
Function:
[0–9999] Read only. Displays the CIP
product code.
*
3 3
103