GE AF-650 GP Programming Manual page 29

Parameter Descriptions
[1284] Comm. Option STW Extended network communication
[1285] Drive Port CTW 1
[1286] Drive Port REF 1
3 3
[1290] Alarm Word
[1291] Alarm Word 2
[1292] Warning Word
[1293] Warning Word 2
[1294] Ext. Status Word
[1295] Ext. Status Word 2
K-20 Display Line 1.1 Small
Option: Function:
Select a variable for display in line 1, left position. The
options are the same as listed for parameter group
K-2#.
K-21 Display Line 1.2 Small
Option: Function:
Select a variable for display in line 1, middle position.
The options are the same as listed for parameter group
K-2#.
K-22 Display Line 1.3 Small
Option: Function:
Select a variable for display in line 1, right position. The
options are the same as listed for parameter group
K-2#.
K-23 Display Line 2 Large
Option: Function:
Select a variable for display in line 2. The options are
the same as those listed for parameter group K-2#.
K-23 Display Line 2 Large
Option: Function:
Select a variable for display in line 2. The options are
the same as those listed for parameter group K-2#.
28
AF-650 GP Programming Guide
option status word.
Control word (CTW) received from
the Bus Master.
Status word (STW) sent to the Bus
Master.
One or more alarms in a Hex code.
One or more alarms in a Hex code.
One or more warnings in a Hex
code.
One or more warnings in a Hex
code.
One or more status conditions in a
Hex code.
One or more status conditions in a
Hex code.
K-25 Quick Start
Array [50]
Define up to 50 parameters to appear in the Quick Start Menu,
accessible via the [Quick Menu] key on the keypad. The
parameters will be displayed in the Quick Start Menu in the
order they are programmed into this array parameter. Delete
parameters by setting the value to '0000'.
For example, this can be used to provide quick, simple access to
just one or up to 50 parameters which require changing on a
regular basis (e.g. for plant maintenance reasons) or by an OEM
to enable simple commissioning of their equipment.
Range: Function:
0 [0 - 9999] Define up to 50 parameters to appear in the
*
Quick Start Menu, accessible via the [Quick
Menu] key on the keypad. The parameters will be
displayed in the Quick Start Menu in the order
they are programmed into this array parameter.
Delete parameters by setting the value to '0000'.
For example, this can be used to provide quick,
simple access to just one or up to 50 parameters
which require changing on a regular basis (e.g.
for plant maintenance reasons) or by an OEM to
enable simple commissioning of their equipment.
3.2.4 K-3# Keypad Custom Readout
It is possible to customize the display elements for various
purposes: *Custom Readout. Value proportional to speed
(Linear, squared or cubed depending on unit selected in
K-30 Unit for Custom Readout) *Display Text. Text string
stored in a parameter.
Custom Readout
The calculated value to be displayed is based on settings
in K-30 Unit for Custom Readout, K-31 Min Value of Custom
Readout (linear only), K-32 Max Value of Custom Readout,
F-17 Motor Speed High Limit [RPM], F-15 Motor Speed High
Limit [Hz] and actual speed.
Illustration 3.4
DET-618C