Mitsubishi Electric IQSS-R-E Reference Manual page 71

Backup folder/file
Backup data is created in the 'iQSS' folder in the root directory when backing up the data.
If no 'iQSS' folder exists when backing up the data, an 'iQSS' folder will be newly created.
Up to 100 backup folders (date_number) can be created in the 'CC-Link' folder.
Do not change a backup folder name, configuration or saved file. Otherwise, data may not be restored properly.
For the backup file capacity, refer to the following section.
Page 368 Backup File Capacity
■Backup folder configuration
The following figure shows the backup folder configuration in an SD memory card.
Root directory
/ iQSS
When backing up the data of a device supporting iQSS, which is connected to a bridge module
(NZ2AW1C2AL):
• Backup data is stored in the 'CC-Link' backup folder.
• The station sub-ID number is the same ID number as the AnyWireASLINK address ID.
• The backup file (STATION0000.QBR) of the bridge module is not created.
1) Backup folder
(Date_Number)
Maximum of 100
CC-Link 20141211_15
2) Backup folder
(I/O number_Station
(Station number)
number)
0001_ 0001
3) STATION0001.QBR
(Station sub-ID number)
0001_ 0002
4) SUBID0001.QBR
4) SUBID0002.QBR
4) SUBID0003.QBR
4.5 Backing up/Restoring Data of Devices Supporting iQSS
Backup data
(Backup file)
SSBRINF.QSI
(System file)
Backup data
(Backup file)
(Backup file)
(Backup file)
SSBRINF.QSI
(System file)
4 CC-Link
4
69