Mitsubishi Electric IQSS-R-E Reference Manual page 364

*1 The bit turns ON at boot start, and turns OFF at the completion.
*2 The bit turns ON when the writing of device initial values is started, and turns OFF at completion.
*3 The bit turns ON while performing communication protocol, and turns OFF at completion.
*4 The bit turns ON when data logging setting is registered, and turns OFF at the completion or stop of data logging.
*5 The bit turns ON while either of the following operation is in process;
⋅The batch save function or the batch load function
⋅The iQ Sensor Solution backup or restoration
*6 Start I/O number indicates the first three digits in four-digit hexadecimal representation.
APPX
362
Appendix 6 Special Relay (SM)/Special Register (SD) List