Mitsubishi Electric IQSS-R-E Reference Manual page 361

Number Name
SD1439 iQ Sensor Solution
backup/restoration
target setting (target
module)
SD1440 iQ Sensor Solution
backup/restoration
target setting (target
device 1)
SD1441 iQ Sensor Solution
backup/restoration
target setting (target
device 2)
SD1444 iQ Sensor Solution
backup/restoration
operation setting for
error occurred
SD1445 iQ Sensor Solution
backup/restoration
communication timeout
time
SD1446 iQ Sensor Solution
backup/restoration
execution status
SD1447 iQ Sensor Solution
backup/restoration total
number of target
devices
SD1448 iQ Sensor Solution
backup/restoration
execution status (total
number of devices in
which the processing
has been completed
successfully)
SD1449 iQ Sensor Solution
backup/restoration
execution status (total
number of devices in
which the processing
has been completed
with an error)
SD1450 iQ Sensor Solution
backup/restoration
execution status
(progress per device)
SD1451 iQ Sensor Solution
backup folder number
Description Details
Setting a target device This register is used to set a target module for data backup/restoration.
(target module) for data • Start I/O No.
backup/restoration • 03FFH: Built-in Ethernet
Setting a target device for This register is used to set a target device for data backup/restoration.
data backup/restoration <AnyWireASLINK>
• ID number
<CC-Link, CC-Link IE Field Network>
• Station number
<Ethernet>
• IP address (lower 16 bits)
Setting a target device for This register is used to set a target device for data backup/restoration.
data backup/restoration <AnyWireASLINK>
• 0: (Not used)
<CC-Link, CC-Link IE Field Network>
• Station sub-ID number
<Ethernet>
• IP address (upper 16 bits)
Storing the operation This register stores the operation setting when a data backup/restoration
setting when a data error occurred.
backup/restoration error
b15
occurred
• b0 to b7: Operation setting for error (0H: Continue, 1H: Stop)
• b8 to b15: Fixed to 0H
Specifying a This register is used to specify a communication timeout time for iQ
communication timeout Sensor Solution data backup/restoration in 100 milliseconds.
time for iQ Sensor 0: 60000 ms (default)
Solution data backup/ 1 to 65535 (100 ms): 100 to 6553500 ms
restoration
Storing an execution This register stores the execution status of data backup/restoration.
status of data backup/ • 0H: Not executed
restoration • 1H: Ready
• 2H: Being executed
• 3H: Completed
• 10H: Wait
• 11H: Cancelled (no error)
• FEH: Cancelled (error)
• FFH: Error
Storage of backup/ This register stores the total number of devices for data backup/
restoration total number restoration per execution unit.
of target devices A value is cleared to '0' when the right-to-use is acquired.
Storage of the backup/ This register displays the number of normally completed devices for
restoration execution backup/restoration per execution unit.
status (total number of The number of normally completed devices out of all the completed
devices in which the devices is stored.
processing has been A value is cleared to '0' when the right-to-use is acquired.
completed successfully)
Storage of the backup/ This register displays the number of devices completed with an error for
restoration execution backup/restoration per execution unit.
status (total number of The number of abnormally completed devices out of all the completed
devices in which the devices is stored.
processing has been A value is cleared to '0' when the right-to-use is acquired.
completed with an error)
Storage of the backup/ This register stores the progress of the data backup/restoration
restoration execution processing per device in percentage (0 to 100%).
status (progress per A value is cleared to '0' when the right-to-use is acquired.
device)
Storing the number of a This register stores the number of a folder in which backup data is
folder in which backup stored.
data is stored • 0 to 99: Folder number
• FFFFH: Backup data not saved
FFFFH' is stored when the right-to use is acquired.
*6
: Module
b8 b7 b0
Appendix 6 Special Relay (SM)/Special Register (SD) List
Set by
(setting
timing)
U
U
U
U
U
S (status
change)
A
S (status
change)
S (status
change)
S (status
change)
S (status
change)
S (status
change)
APPX
359