4.1
Detecting Devices Supporting iQSS Automatically
A slave station connected to a CC-Link master/local module can be detected and the information can be displayed in the "CC-
Link Configuration" window.
For the creation method of a new project and the operation methods of the "CC-Link Configuration" window, refer to the
following manual.
GX Works2 Version 1 Operating Manual (Common)
Operating procedure
Select
1. Select
4 CC-Link
56
4.1 Detecting Devices Supporting iQSS Automatically
4. Check
3. Click
2.Enter
Click
1.
Create a new project in an engineering tool.
2.
Select "Parameter" "Network Parameter" "CC-Link" on
the Project view.
3.
Select and enter necessary parameters on the "Network
Parameter - CC-Link Module Configuration" screen.
Check that "Read Model Name of Slave Station" is
selected on the "Operation Setting" screen.
Page 54 Checking if "Read Model Name of
Slave Station" is selected
4.
Select "Set the station information in the "CC-Link
configuration" window".
5.
Read the message and click the [Yes] button.
The [Station Information] button of "Station Information Setting" is
changed to [CC-Link Configuration Setting] button.
6.
Click the [CC-Link Configuration Setting] button.