Monitoring Devices Supporting Iqss - Mitsubishi Electric IQSS-R-E Reference Manual

3.4

Monitoring Devices Supporting iQSS

The connection statuses of devices supporting iQSS can be monitored.
Operating procedure
1. Check
Select
Sensor/device monitor reads a large volume of information from a CPU module at once.
Therefore, the processing speed of the sensor/device monitor function may decrease depending on the set
communication route.
3 AnyWireASLINK
32
3.4 Monitoring Devices Supporting iQSS
1. Select
2. Select
3. Click
2. Click
List of modules
Device map area
Monitoring Information
window
1.
Select [Diagnostics]  [Sensor/Device Monitor] with an
engineering tool.
2.
Select an AnyWireASLINK master module in the "Module
Selection (Sensor/Device Monitor)" screen, and click the [OK]
button.
3.
When an automatic address detection is required, select the
"Execute Detect Now after Address Auto-recognition"
checkbox, then click the [Yes] button.
For a case in which an automatic address detection is required,
refer to the following manual.
MELSEC-Q/L AnyWireASLINK Master Module User's Manual
The "Sensor/Device Monitor for AnyWireASLINK" screen appears.
4.
Select a target device supporting iQSS to be monitored in
'List of modules' or 'Device map area' in the "Sensor/Device
Monitor for AnyWireASLINK" screen.
The status of the selected device supporting iQSS is displayed in
the "Monitoring Information" window. (Page 343
AnyWireASLINK)