7.3
Monitoring Devices Supporting iQSS
The connection statuses of devices supporting iQSS can be monitored.
Operating procedure
7 AnyWireASLINK
170
7.3 Monitoring Devices Supporting iQSS
1.
Select [Diagnostics] [Sensor/Device Monitor] with an
engineering tool.
2.
Select an AnyWireASLINK master module in the "Module
Selection (Sensor/Device Monitor)" screen, and click the [OK]
button.
3.
When an automatic address detection is required, select the
"Execute Detect Now after Address Auto-recognition"
checkbox, then click the [Yes] button.
For a case in which an automatic address detection is required,
refer to the following manual.
MELSEC iQ-R AnyWireASLINK Master Module User's Manual
(Application)
The "Sensor/Device Monitor for AnyWireASLINK" screen appears.
4.
Select a target device supporting iQSS to be monitored in the
"Sensor/Device Monitor for AnyWireASLINK" screen.
The status of the selected device supporting iQSS is displayed in
the "Monitoring Information" window.