8.3
Monitoring Devices Supporting iQSS
The connection statuses of devices supporting iQSS can be monitored.
Operating procedure
1.
Select [Diagnostics] [Sensor/Device Monitor] with an
engineering tool.
2.
Select a CC-Link master/local module in the "Module
Selection (Sensor/Device Monitor)" screen, and click the [OK]
button.
3.
Read the message and select the "Set the Module
Connected to the Communication Module also as the Read
Object" checkbox, then click the [Yes] button.
The "Sensor/Device Monitor for CC-Link" screen appears.
4.
Select a target device supporting iQSS to be monitored in the
"Sensor/Device Monitor for CC-Link" screen.
The status of the selected device supporting iQSS is displayed in
the "Monitoring Information" window.
8.3 Monitoring Devices Supporting iQSS
8
8 CC-Link
205