Monitoring Devices Supporting Iqss - Mitsubishi Electric IQSS-R-E Reference Manual

6.4

Monitoring Devices Supporting iQSS

The connection statuses of devices supporting iQSS can be monitored.
Operating procedure
Select
■Display on "Status" in the 'List of devices'
The status in "Status" is displayed when using GX Works2 Version 1.499V or later.
Icons displayed in the "Monitoring Information" window may differ from the status displayed in "Status".
■Icons displayed on the "Status" in the 'List of devices'
Icon Description
This icon is displayed when an error occurred on the connected device supporting iQSS.
This symbol is displayed when the first five digits of the serial number for a CPU module used are '15072' or lower by which the status display is
not supported.
This icon is displayed when a CPU module cannot communicate with a device supporting iQSS, or the status display is not supported by the
device supporting iQSS being used.
1.
2.
1. Select
2. Select
3. Click
The "Sensor/Device Monitor for Ethernet Configuration" screen
appears.
3.
List of devices
The status of the selected device supporting iQSS is displayed in
Device map area
the "Monitoring Information" window.
Monitoring Information
window
Select [Diagnostics]  [Sensor/Device Monitor] with an
engineering tool.
Select a built-in Ethernet port LCPU in the "Module Selection
(Sensor/Device Monitor)" screen, and click the [OK] button.
Select a target device supporting iQSS to be monitored in
'List of devices' or 'Device map area' in the "Sensor/Device
Monitor for Ethernet Configuration" screen.
For the "Current Value" in the "Monitoring
Information" window, values written to devices in a
CPU module from the device supporting iQSS are
displayed.
To display the current values accurately, configure
the following setting.
• Select "Enable online change (FTP, MC
Protocol)" in the [Built-in Ethernet Port Setting]
tab on the "L Parameter Setting" screen, and
write parameters to a CPU module.
6.4 Monitoring Devices Supporting iQSS
6
6 Ethernet
143