Operating procedure
■Reading parameters
1. Select
2. Check
■Writing parameters
1. Select
2. Check
1.
Select "Parameter read".
2.
Select a parameter to be read.
3.
Click the [Execute] button.
The selected parameter is read and the value is displayed in the
column of "Read Value".
3. Click
1.
Select "Parameter write".
2.
Select a parameter to be written.
3.
Enter a value in the column of "Write Value".
3. Enter
4.
Click the [Execute] button.
The value entered in the column of "Write Value" is written to the
device supporting iQSS.
4. Click
3.3 Reading/Writing Parameters from/to Devices Supporting iQSS
3 AnyWireASLINK
31
3