Table of Contents
Advertisement
Data backup
Information of a device supporting iQSS can be saved in an SD memory card for each station by using an engineering tool.
Operating procedure
The initial values of the backup setting (SD1363 and SD1367) are as follows:
• SD1363 (folder number setting): FFFFH (automatic specification)
• Lower 8 bits of SD1367 (operation setting on error): 0H (continue)
Use a program when backing up data with the settings other than the one above. (Page 213 Program
execution for data backup)
8 CC-Link
212
8.4 Backing up/Restoring Data of Devices Supporting iQSS
1.
Select a target device supporting iQSS in the "CC-Link
Configuration" window, and select [CC-Link Configuration]
[Online] [Backup Slave Station].
2.
Read the message and click the [Yes] button.
Data is backed up.
Advertisement
Table of Contents
