Samsung DCS Programming Manual page 396

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
ALM CODE ALARM
MJD09 Bit Error Alarm
MJD10 NTWRK Event
MJD11 SPID Init Error
MJD12 SPID Init Rec
MJD13 LPBK Error
MJD14 LPBK Recovery
MJD15 BRI DL Unavail
MJD16 BRI DL Recovery
MJD17 RAM Error
MJD18 E1 Restart
MJD19 PRI Restart
MJD20 BRI Restart
MJD21 PCM Loss
MJD22 PCM Recovery
MNF01 Card Out
MNF02 Card In
MNF03 IPC Error
MNF04 Trunk Fault
MNF05 Trunk Recovery
Alarm is activated when the when error rate exceeds 1x10-6 er-
rors. Note: 1x10-6 is threshold for minor alarm; 1 x 10-3 is
threshold for major alarm errors on E1, PRI or BRI.
Alarm Data = Cabinet, Slot (Cx-Syy)
An Implausible event has occurred on the PRI or BRI Network
digital line. Protocols do not match or subscriber ID mismatch.
Alarm Data = Cabinet, Slot (Cx-Syy)
The BRI received an error from the network
Alarm Data = Cabinet, Slot, Channel (Cx-Syy-czz)
The BRI has recovered from an error on the network
Alarm Data = Cabinet, Slot, Channel (Cx-Syy-czz)
Internal on-demand loopback failed.
Alarm Data = Cabinet, Slot, Channel (Cx-Syy-czz)
Internal on-demand loopback test passed.
Alarm Data = Cabinet, Slot, Channel (Cx-Syy-czz)
A BRI data link is out of service.
Alarm Data = Cabinet, Slot, Channel (Cx-Syy-czz)
A BRI data link is back in service.
Alarm Data = Cabinet, Slot, Channel (Cx-Syy-czz)
An error has occurred in the TEPRI or BRI card RAM.
Alarm Data = Cabinet, Slot (Cx-Syy)
The E1 card has restarted
Alarm Data = Cabinet, Slot (Cx-Syy)
The PRI card has restarted
Alarm Data = Cabinet, Slot (Cx-Syy)
The BRI card has restarted
Alarm Data = Cabinet, Slot (Cx-Syy)
Loss of PCM coding on a digital facility.
Alarm Data = Cabinet, Slot (Cx-Syy)
Recovery of PCM coding on a digital facility.
Alarm Data = Cabinet, Slot (Cx-Syy)
A circuit card mounted in a universal slot has been removed from
service or is not recognised by the system
Alarm Data = Cabinet,Slot (Cx-Syy)
A circuit card mounted in a universal slot has been returned to
service.
Alarm Data = Cabinet, Slot (Cx-Syy)
Inter processor communication error has occurred.
Alarm Data = Cabinet-Slot (Cx-Syy)
Out of service trunk detected via loop detect. Internal CODEC
test.
Alarm Data = Cabinet, Slot, Port (Cx-Syy-Pzz)
Out of service trunk detected via loop detected as out of service
is now operational.
Alarm Data = Cabinet, Slot, Port (Cx-Syy-Pzz)
MMC 851 (Page 4 of 5)
MMC PROGRAMS
FEBRUARY 2004
DEFINITION