Samsung DCS Programming Manual page 181

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
MMC: 434
FOR: iDCS100
Purpose: (This is a read-only MMC.)
Confirms the connection status of stations or trunks. Display status shows the status of a
station or trunk at the time requested. If a station or trunk is in an idle state the display
will show "IDLE". If the station or trunk selected is not a valid selection the display will
show "INVALID DATA". If the station or trunk is made busy by the CPU the display will
show "MADE BUSY". If the station is in busy state with no other connection, the display
will show "BUSY" only. If a conference is in progress with the selected trunk or station,
the display will show one of the conference parties and an arrow ( ). Other parties in
the conference can then be displayed by pressing the RIGHT soft key.
ACTION
1. Open programming and select 434
Display shows (for example)
2. Dial station or trunk number (e.g., 205)
OR
Press VOLUME keys to select
(In this example, 205 is busy.)
3. Press Transfer/TRSF to store and exit
OR
Press SPEAKER to store and advance to next
MMC
Default Data:
Related Items:
iDCS500 OS500
None
MMC 108 Station Status
MMC 409 Trunk Status Read
MMC 434 (Page 1 of 1 )
CONNECTION STATUS
DISPLAY
DISPLAY STATUS
201
DISPLAY STATUS
205
MMC PROGRAMS
FEBRUARY 2004
IDLE
BUSY