Samsung DCS Programming Manual page 295

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
iDCS & OS500: To implement ring plan changes and/or the alternative greeting,
the caller must enter the number (passcode) that implements the special pro-
gram. The passcode must be followed by two digits: the first digit (1-6) selects
the desired ring plan to select (or can be 0 for no change); the second digit can
be 1 for the alternative greeting or 0 for no alternative.
DCS/CII: To change day/night mode and/or the alternative greeting, the caller
must enter the number (passcode) that implements the special program. The
passcode must be followed by digit 1–3: 1 selects day, 2 selects night and 3 se-
lects the alternative greeting.
• If an RP (Ring Plan) key is programmed in an iDCS or OS500 system, it will flash to
show that the ring plan has the alternative message set. (The normal status of this
light in a ring plan is on steady.) If an RTO (Ring Time Override) key is available this
will also flash
•
If the greeting message is not changed but the ring plan is changed, the system will
remain in the selected ring plan until the next scheduled ring plan change. If the
greeting message is changed the system will remain in the existing ring plan or the
selected ring plan until the alternative greeting is manually changed back
Example (iDCS/OS500): Caller dials into the system and is answered by the AA card. Caller en-
ters the passcode then dials 3, to select ring plan 3, followed by 1 to turn on the alternative greet-
ing. The system now rings according to ring plan 3. Ring plan 3 is directed to the AA card and the
caller is now answered by the alternate greeting.
ACTION
1. Open programming and select 732
Display shows
2. Dial Table number (01–12, e.g. 02)
OR
Press VOLUME keys to select and press RIGHT
soft key
3. Dial entry number (see
above), e.g. 002
OR
Press VOLUME keys to select and press RIGHT
soft key
4. Enter Dial DIGIT (e.g. 2∗∗)
Press RIGHT soft key
5. Dial Destination (e.g. B)
OR
Press VOLUME keys to select and press RIGHT
soft key
6. Press Transfer/TRSF to store and exit
OR
Press SPEAKER to store and advance to next
MMC
Number of Table Entries,
MMC 732 (Page 2 of 3)
MMC PROGRAMS
FEBRUARY 2004
DISPLAY
AA TRANS TB (01)
→ 500
001:0
AA TRANS TB (02)
→NONE
001:
AA TRANS TB (02)
→NONE
002:
AA TRANS TB (02)
002:2∗∗_ →
AA TRANS TB (02)
→ B
002:2∗∗