Samsung DCS Programming Manual page 330

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
MMC: 801
FOR:
Purpose: Changes the passcode which allows access to
Program) from its current value.
Note: The passcode is four digits long. The current or "old" passcode is required for this MMC.
ACTION
1. Open programming and select 801
2. Enter new passcode
3. Enter new passcode again to verify
4. If verification succeeds, press RIGHT soft key to
continue and enter desired MMC
If verification fails, display shows "Failure"
and system returns to step 2
5. Press Transfer/TRSF to store and exit
OR
Press SPEAKER to advance to MMC
Default Data:
Related Items:
ALL SYSTEMS
Default passcode = 4321
MMC 800 Enable Technician Program
MMC 801 (Page 1 of 1)
CHANGE TECHNICIAN
PASSCODE
MMC 800 (Enable Technician
DISPLAY
TECH. PASSCODE
NEW CODE:_
TECH. PASSCODE
NEW CODE:∗∗∗∗
TECH. PASSCODE
VERIFY :∗∗∗∗
TECH. PASSCODE
VERIFY :SUCCESS
TECH. PASSCODE
VERIFY :FAILURE
MMC PROGRAMS
FEBRUARY 2004