Samsung DCS Programming Manual page 338

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
MMC: 806
FOR: DCS CI CII
Purpose: Pre-programmes a slot for a specific card. For example, after the system is in-
stalled and a new card is added, you should run this program for the system to accept
the card. Programming of ports, extensions, trunks etc, must be done in
The procedure differs slightly for each type of system, as described below.
DCS PROCEDURE
ACTION
1. Open programming and select 806
Display shows
2. Enter cabinet number (e.g., 3)
OR
Press VOLUME keys to make selection and press
RIGHT soft key to move cursor
3. Enter slot number (e.g., 5)
OR
Press VOLUME keys to make selection and press
RIGHT soft key to return to step 2
4. Press Transfer/TRSF to store and exit
OR
Press SPEAKER to store and advance to next
MMC
COMPACT II & iDCS100 PROCEDURE
ACTION
1. Open programming and select 806
Display shows
2. Press VOLUME keys to select slot number
3. Press RIGHT soft key to change previous card
type
4. Press Transfer/TRSF to store and exit
OR
Press SPEAKER to store and advance to next
MMC
816 iDCS100
MMC 806 (Page 1 of 2)
CARD PRE-INSTALL
iDCS500 OS500
DISPLAY
C1–01 :INSTALL
PRITRK →PRITRK
C3–01 :INSTALL
PRITRK →PRITRK
C3–05 :INSTALL
→ DLI
DLI
DISPLAY
O.SLI SLOT
O.2SLI →O.2SLI
EXP.1 SLOT
→8DLI
6DLI
EXP.1 SLOT
→8DLI
8DLI
MMC PROGRAMS
FEBRUARY 2004
MMC 724.