Samsung DCS Programming Manual page 175

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
MMC: 423
FOR: DCS CI CII
Purpose: Selects the function of each BRI access. You can set a BRI access as
"TRUNK" to which an ISDN C.O. line is connected, or as "STATION" to which an ISDN
terminal is connected.
For each BRI access, two adjacent ports are assigned. You need only change the value
for one of the two ports; the value for the other port will be changed automatically.
Note: Any change made in this MMC will take effect only after restarting the BRI card. Use
418, Card Restart, to restart the card.
ACTION
1. Open programming and select 423
Display shows (e.g. TRUNK)
2. Dial BRI trunk number (e.g. 703)
OR
Press VOLUME keys to select the port
Use the RIGHT soft key to position the cursor
under "TRUNK" (or "STATION")
3. Press VOLUME keys to make selection (TRUNK
or STATION)
Press RIGHT soft key to position the cursor under
the port number again
4. For other ports, repeat steps 2 and 3
5. Press Transfer/TRSF to store and exit
OR
Press SPEAKER to store and advance to next
MMC
Default Data:
Related Items:
816 408i iDCS100
TRUNK
MMC 418 Card Restart
MMC 419 BRI Option
MMC 424 S Mapping
0
MMC 423 (Page 1 of 1)
S/T MODE
iDCS500 OS500
DISPLAY
[701] S/T MODE
TRUNK
[703] S/T MODE
TRUNK
[703] S/T MODE
STATION
MMC PROGRAMS
FEBRUARY 2004
MMC