Samsung DCS Programming Manual page 278

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
MMC: 723
FOR:
Purpose: Refer to the description in
MMC 723 allows you to program keys for all stations rather than individual stations.
Programming in MMC 723 is also done on the basis of keyset type (12-button, 24-button,
etc) as shown in the following table.
KEYSET TYPE
Dial DCS/CII/816
0 24-BTN
1 12-BTN
2 6-BTN
3 –
4 48-BTN AOMS
5 –
6 28-BTN
7 18-BTN
8 8-BTN
9 –
ACTION
1. Open programming and select 723
Display shows
OR
For 408/408i systems, display shows
The programming procedure is, however, the same)
(
2. Enter keyset type using table above ( e.g.,1)
OR
Press VOLUME keys to make selection and press
RIGHT soft key
3. Enter key number (e.g., 12)
OR
Press VOLUME keys to make selection and press
RIGHT soft key
4. Press dial keypad to select function
OR
Press VOLUME keys to make selection and press
RIGHT soft key to advance cursor to step 5 to enter
extender, if required
OR
Press LEFT soft key to return to step 3
SYSTEM KEY PROGRAMMING
ALL SYSTEMS
MMC 722, Station Key Programming,
408/408i
24-BTN
24-BTN EURO
12-BTN
6-BTN
28-BTN
18-BTN
8-BTN
24B SIMPLE
–
–
MMC 723 (Page 1 of 2)
iDCS
24-BTN 24-BTN
12-BTN 12-BTN
– 6-BTN
6-BTN 48/64-BTN AOMS
– 20-BTN
48/64-BTN AOMS 28-BTN
20-BTN 18-BTN
28-BTN 8-BTN
18-BTN 99-BTN
8-BTN 38-BTN
21-BTN
14-BTN
DISPLAY
TYPE:24 BTN SETS
01:CALL1 →
OR
TYPE:24 BTN SETS
01:DT71
TYPE:12 BTN SETS
01:CALL1 →
TYPE:12 BTN SETS
12:DS
TYPE:12 BTN SETS
12:DS
MMC PROGRAMS
FEBRUARY 2004
but note that
OS500
→
→
→GPIK