Samsung DCS Programming Manual page 362

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
MMC: 829
FOR:
iDCS100
Purpose: Allows you to view and set options for network printer(s). Up to eight (01–08)
printers can be connected and configured here. Options for each printer are:
DATA TYPE
CURR STATUS
EMPTY BUFF
UPDATE LAN
DESTINATION
PRINTER IP
PRINTER TCP
LAN TCP
RETRY COUNT
RETRY WAIT
PJL ENABLE
LANGUAGE
PAPER SIZE
FONT TYPE
DUPLEX ENAB
ORIENTATION
PRINT TRAY
RESOLUTION
LINE/PAGE
(You are advised to contact Technical Support or check technical bulletins for details of
supported options.)
DATA TYPES AND PORT NUMBERS
DATA TYPE
SMDR
UCD REPORT
TRAFFIC REPORT
ALARM REPORT
UCD VIEW
PERIODIC UCD
HOTEL REPORT
PMS
OS500
iDCS500
Displays setting of SIO port to which printer is attached, e.g. SMDR (see
table, below)
Current status (read only)
Empty printer buffer (Yes/No)
Apply new values set in this MMC (Yes/No)
PC/Printer/Both/None
Printer IP address
Printer port number (5 digits)
Port number of LAN TCP (5 digits)
No. of retries to print (00–10)
Wait time between retries (005–250 secs)
True/False (to match printer)
RAW/PCL/PS (to match printer)
A4/Letter
Courier/Times New Roman
True/False (to match printer)
Portrait/Landscape
Default/Tray 1/Tray 2/Manual
300/600 dpi
Lines per page (00–99)
PORT NO.
5100
5101
5102
5103
5104
5105
5106
5107
MMC 829 (Page 1 of 2)
LAN PRINTER
(iDCS systems must have a LAN interface installed.)
MMC PROGRAMS
FEBRUARY 2004