Samsung DCS Programming Manual page 283

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
MMC: 725
FOR:
Purpose: Selects the information to be printed on SMDR reports. Some or all of the fol-
lowing options may be selected, depending on your system. All have YES/NO options
(YES=print) except where a new value or directory name is required.
Two options, HOTEL PAGE FEED and HOTEL START LINE, relate to the optional Hotel
application and are provided for setting up the required printer output for invoices (port
set to service type HM REPT in
PAGE HEADER
LINE PER PAGE
INCOMING CALL
OUTGOING CALL
AUTHORISE CODE
SMDR START TIME
IN/OUT GROUP
DND CALL
WAKE-UP CALL
DIRECTORY NAME
CALLER ID DATA
ABANDON CALL
NO. OF DIAL MASK
INCOMING ANSWER
INTERCOM CALL
KEY MMC IN/OUT
HOTEL PAGE FEED
HOTEL START LINE
ALL SYSTEMS
MMC 804).
Determines whether a page header prints at the top of each
page. This would normally be turned off if SMDR is being sent to
a call accounting machine.
Selects the length of each page to determine when to print the
SMDR header. The number of lines is in the range 01–99.
Determines whether incoming calls print on SMDR.
Determines whether outgoing calls print on SMDR.
Determines whether authorisation codes print on SMDR.
Determines whether valid calls will include the minimum call time
in total call duration (set in
Allows a message, IN GROUP or OUT GROUP, to be printed in
the Digits Dialled column each time a station enters or leaves a
group.
Allows a message, DND ON or DND OFF, to be printed in the
Digits Dialled column each time a station enters or leaves DND.
Determines whether stations receiving an alarm reminder call
print on SMDR.
Allows the system administrator to enter a 16-character name
which will appear on the SMDR header.
Can be selected to print CLIP data received from the C.O. on
incoming ISDN calls. This option requires the use of a 132-
column printer or an 80-column printer set for condensed print.
(Not available on 408 systems.)
If this option is set to YES, unanswered calls will print on SMDR.
(Not available on 408 systems.)
Number of dialled digits not to be printed (00–18)
If set to YES, the duration of calls ringing before being answered
prints on SMDR.
Determines whether internal calls print on SMDR.
If set to YES, the SMDR will show programming being opened
and closed (iDCS 500 'L' and OS500 systems only).
Determines where a page feed is inserted in Hotel invoice print.
(Start, End or Both)
Determines number of blank lines to print on Hotel invoice print.
MMC 725 (Page 1 of 3)
MMC PROGRAMS
FEBRUARY 2004
SMDR OPTIONS
MMC 501).