Samsung DCS Programming Manual page 358

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
MMC: 824
FOR: iDCS100
Purpose: Assigns the digit translation table used for Q-SIG networking. Generally, to
call an extension on another node of a network, the station user must dial the node ID
and extension number. This MMC provides a simple digit translation so that the user
need only dial the extension number to call the station on the other node. The access
digit needs to be programmed in
The number of entries for the network dial translation table is:
iDCS500 'L' & OS500 = 96
Note: iDCS100 systems require a MEM4 card.
ACTION
1. Open programming and select 824
Display shows access digit programmed in
MMC 724 (e.g. 3)
2. Dial entry number e.g. 01
OR
Press VOLUME keys to select and press RIGHT
soft key
3. Dial digit string for access to node (e.g. 300)
followed by the access digit ('3' in this example)
(Press RIGHT soft key to move cursor to SZ field,
if necessary)
4. Enter digit size: the number of digits the user will
dial ('3' in this example, for 3-digit extension)
OR
Press VOLUME keys to select and press RIGHT
soft key
5. Enter maximum digits to be dialled by system
('6' in this example—digit string for access, plus
number of extension digits=300xxx)
OR
Press VOLUME keys to select and press RIGHT
soft key
NETWORK DIAL TRANSLATION
iDCS500 OS500
MMC 724
iDCS500 'M' = 16
MMC 824 (Page 1 of 2)
(NTWK LCR DIAL NO. option) first.
iDCS100 = 20
DISPLAY
01: 3
SZ:0 MAX:00 MB:N
01: 3
SZ:0 MAX:00 MB:N
01: 3
SZ:0 MAX:00 MB:N
01: 3
SZ:3 MAX:00 MB:N
01: 3
SZ:3 MAX:06 MB:N
MMC PROGRAMS
FEBRUARY 2004
_
3003
3003
3003