Samsung DCS Programming Manual page 180

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
MMC: 433
FOR: DCS CII
Purpose: The Trunk Cost Rate flags are entered for each trunk. Dial Plans are defined
in MMC 746. Rate Calculation Tables are defined in
fined with up to eight cost rates. A cost rate is selected by entering a digit '1' beneath it
in the display. If an entry is left with all zeros, no call costing will be calculated for that
particular dial plan. Cost rate 8 is set for incoming calls only: select this cost rate for a
trunk only if you want incoming call costing.
By default, all cost rates are selected. For most applications there is no need to change
this default.
ACTION
1. Open programming and select 433
Display shows trunk number and cost rates (CR)
2. Dial trunk number (e.g., 705)
OR
Press VOLUME keys to select trunk and press
RIGHT soft key to move cursor
OR
Select all trunks
3. Dial 1 to select a cost rate (insert "1") or 0 to
deselect (insert "0") (e.g. select 1 and 2 only)
Press VOLUME keys to move cursor
4. Press Transfer/TRSF to store and exit
OR
Press SPEAKER to store and advance to next
MMC
Default Data:
Related Items:
iDCS100 iDCS500
(see section 1.5.2)
All Cost Rates Assigned
MMC 110 Station On/Off
MMC 746 Costing Dial Plan
MMC 747 Rate Calculation Table
MMC 433 (Page 1 of 1 )
TRUNK COST RATE
OS500 Hotel application only
MMC 747. Each trunk may be de-
DISPLAY
[701]
CR
[705]
CR
[705]
CR
(Call Cost option)
MMC PROGRAMS
FEBRUARY 2004
:12345678
:11111111
:12345678
:11111111
:12345678
:11000000