Samsung DCS Programming Manual page 171

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
MMC: 421
FOR: DCS CI CII
Purpose: Assigns an incoming MSN call to a specific station. If any entry in MSN DIGIT
TABLE matches an incoming call's called party number, either the specific station is
alerted, if it is programmed to accept the call, or the call is cleared if it is programmed to
reject the call.
If the incoming called party number does not have a matching entry in the MSN table, the
operator is alerted.
You can give each MSN number to a specific station and you can select a call waiting
option: when a destination is busy, the incoming call must be cleared or camped-on to
the station (which is alerted to the call).
There is a total of eight entries on a trunk basis and each entry consists of the following
fields:
DIGITS
DAY DEST
OR
RING PLAN
NIGHT DEST
OR
RING PLAN
CALL WAIT
OPTION
Note: For each BRI access, two adjacent ports are assigned. You need only change the value for one of the
two ports; the value for the other port will be changed automatically.
816 iDCS100 iDCS500
Digits to be received (maximum of 10).
Destination in day mode - can be a station or a station group.
Destinations for ring plans 1-6 - can be a station or a station group.
Destination in night mode - can be a station or a station group.
Destinations for ring plans 1-6 - can be a station or a station group.
Toggles YES or NO: if YES then the call will be camped-on at busy destina-
tion while NO gives busy indication.
Accept: the selected destination party will be alerted.
Reject: the call is cleared
MMC 421 (Page 1 of 2)
MMC PROGRAMS
MSN DIGIT
OS500
FEBRUARY 2004