Samsung DCS Programming Manual page 328

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
MMC: 800
FOR:
Purpose: Opens and closes system-level (technician) programming. If programming is
not opened and an attempt is made to access a system MMC, the error message "AC-
CESS DENIED" will be displayed.
A 4-digit passcode is required to access this MMC (which can be changed in
When opened, this MMC enables access to all MMCs.
The procedure below describes how to open programming.
ACTION
1. Press Transfer/TRSF 800
Display shows
2. Enter passcode
DCS, iDCS500 & OS500 only – Correct code
shows (to allow you to select a tenant)
OR
Other systems – Correct code shows
If you enter an incorrect code, you see this display
and you return to the passcode entry display so
you can try again
3. Enter 1 to enable or 0 to disable
OR
Press VOLUME keys to select
DCS, iDCS500 & OS500 only - Press RIGHT soft
key to move to TENANT field and enter number
(1–2)
4. Press SPEAKER to advance to MMC entry level
ENABLE TECHNICIAN
PROGRAM
ALL SYSTEMS
MMC 800 (Page 1 of 2)
MMC PROGRAMS
FEBRUARY 2004
DISPLAY
ENABLE TECH.PROG
PASSCODE:
ENABLE TECH.PROG
PASSCODE: ∗∗∗∗
ENABLE TECH.PROG
DISABLE TENANT:1
OR
ENABLE TECH.PROG
DISABLE
ENABLE TECH.PROG
PASSCODE ERROR
ENABLE TECH.PROG
ENABLE TENANT:1
OR
ENABLE TECH.PROG
ENABLE
ENABLE TECH.PROG
ENABLE TENANT:2
801:TEC.PASSCODE
SELECT PROG.ID
MMC 801).