Samsung DCS Programming Manual page 394

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
Procedure to Print or Clear Alarms
ACTION
1. Open programming and select 851
Display shows
2. Press VOLUME keys to select CLEAR or PRINT
3. Press RIGHT soft key
4. Press VOLUME keys to select YES/NO and press
RIGHT soft key
5. Press Transfer/TRSF to store and exit
OR
Press SPEAKER to store and advance to next
MMC
Default Data:
Related Items:
(Your system may not support all the codes listed here.)
ALM CODE ALARM
MJA01 POR Restart
MJA02 Soft Restart
MJA03 Mem Reset
MJA04 MCP Reset
MJA05 LCP Reset
MJB02 Memory Alarm 1
MJB03 Memory Alarm 2
MJB04 Memory Alarm 3
MJB05 Memory Alarm 4
Alarm Buffer Overwritten
MMC 852 Assign System Alarms
ALARM CODE TABLE
MCP restart process has been executed via power on restart
(POR).
MCP restart process has been executed via button reset.
The system RAM has been cleared via manual programming
(PCMMC or KMMC) resulting in a system reset.
The MCP has reset.
Alarm data = Reason
- BUS ERR: Restart Bus Error
- ADDR.ERR: Restart Address Error
- ILLEGAL: Restart Illegal opcode
- ZERO DIVID: Restart Zero divide
- PRIVILEGE: Restart Privilege Violation
- VECTOR 1: Restart Auto Vector Level 1
- DTACK RD: Restart Auto Vector Level 2
- DTACK WR: Restart Auto Vector Level 3
- VECTOR 4: Restart Auto Vector Level 4
- VECTOR 5: Restart Auto Vector Level 5
- VECTOR 6: Restart Auto Vector Level 6
- WR PROTECT: Restart Auto Vector Level 7
- ENDL LOOP: Restart Endless Loop
The SCP or LCP has reset
Alarm data = Cabinet (1, 2 or 3)
A RAM diagnostic check error has occurred in the MCP.
A RAM diagnostic check error has occurred in the SCP.
A RAM diagnostic check error has occurred in the LCP1.
A RAM diagnostic check error has occurred in the LCP2.
MMC 851 (Page 2 of 5)
MMC PROGRAMS
FEBRUARY 2004
DISPLAY
SYS ALARM REPORT
VIEW ALARMS
SYS ALARM REPORT
CLEAR ALARM BUF
SYS ALARM REPORT
ARE YOU SURE:NO
SYS ALARM REPORT
ARE YOU SURE:YES
DEFINITION