Configuring The Chart View - ABB ScreenMaster RVG200 Operating Instructions Manual

ScreenMaster RVG200
Paperless recorder

7.8.2 Configuring the chart view

Chart
Chart view enable
Chart Annotation
Chart divisions
Pointers/Indicators
82
Select the Chart view required:
Off – Chart view disabled
Vertical – Chart runs from top to bottom
Horizontal --> – Chart runs left to right with scale bar on left
Horizontal <-- – Chart runs right to left with scale bar on right
Select the annotations to be displayed on the chart. Alarm events and
operator messages are displayed on the chart adjacent to the point at
which the alarm occurred – see Section 4.5.1, page 28.
This initial setting can be changed by the Operator if Chart annotation
select is enabled in the Chart view menu enables – see Menu Enables,
page 83.
Enter the number of major and minor chart divisions to be displayed on
the chart and its scale bar.
Enter the number of major vertical divisions to be displayed.
Enter the number of minor vertical divisions to appear between the major
chart divisions.
Enable trace pointers to display a chart scale bar with colored pointers to
indicate the instantaneous trace positions.
Disable trace pointers to display the standard chart scale bar.
Enable indicators to display the numbered channel indicators at the top of
the screen.
Disable indicators to hide the indicators and enlarge the Chart view.
7 Configuration
OI/RVG200-EN