ABB ScreenMaster RVG200 Operating Instructions Manual page 91

ScreenMaster RVG200
Paperless recorder
Note. The following parameters are displayed only if Scale type is set to Log.
Low
High
Numerical Display
Note. The following parameters are displayed only if Numerical Display is set to Standard.
Low Limit
High Limit
OI/RVG200-EN
Select the lower limit of the log decade range to be displayed on the Chart
view scale.
Select the upper limit of the log decade range to be displayed on the
Chart view scale.
Select the format in which the process value is to be displayed;
Exponential – displays all values in the form x.xE±y where x is any
number from 0 to 9 (and 99 is out of range).
Standard – display all values in exponential form as above, except
those that fall within the low and high limits.
Enter the low limit, in engineering units, below which values are displayed
in exponential form.
Enter the high limit, in engineering units, above which values are displayed
in exponential form.
7 Configuration
89