ABB ScreenMaster RVG200 Operating Instructions Manual page 67

ScreenMaster RVG200
Paperless recorder
Referring to Fig. 7.6, use data entry dialog boxes as follows:
a
Touch an item or use the
b
Items not selected are indicated by an 'X' in the parameter value window.
c
Parameter limits.
d
Values outside the preset parameter limits or with too many decimal places are highlighted when the
OK button is touched
e
Cursor.
f
Touch the keypad / keyboard characters to enter them at the cursor position *.
g
Delete / backspace.
h
Spacebar.
i
Alternative characters – see Appendix F, page 180.
j
Shift key.
* Refer to Appendix F, page 180 for further information regarding character use.
Note. Tags with a high percentage of capital letters and wide characters such as 'W' or 'M' may appear
truncated in some Operator views. To prevent this, use lower case letters or fewer characters.
1 2 X 4 X
2
3
Electrical Low (0...50mA)
4
Fig. 7.6 Data entry dialog boxes
OI/RVG200-EN
and keys to select it.
1
6
10
5
9 8
7 Configuration
7
65