ABB ScreenMaster RVG200 Operating Instructions Manual page 106

ScreenMaster RVG200
Paperless recorder
Count range
Preset count
Predetermined count
Intermediate count
104
Set the value the totalizer counts from and the value applied when the
totalizer is reset.
Set the value at which the totalizer stops or wraps.
Note.

A counter configured to count up must have a
lower than the
Predetermined count
count down must have a
Predetermined count

Set the required number of decimal places on the higher of the
value or
Preset count
Set the value at which a digital source is activated (for example, this can
be used as an alarm threshold to indicate when the
value is about to be reached).
value. A counter configured to
value greater than the
Preset count
value.
value.
Predetermined count
7 Configuration
value
Preset count
Predetermined count
OI/RVG200-EN