Real-Time Alarms - ABB ScreenMaster RVG200 Operating Instructions Manual

ScreenMaster RVG200
Paperless recorder

7.11.2 Real-time alarms

RTA1 (to 4)
Alarm tag
Daily enables
1st of month enable
On time
Duration
Log enable
128
Enter the tag to be used in the Alarm Event log.
Refer to Appendix F, page 180 for further information regarding character
use in tags.
Select the day(s) on which the alarm is activated.
Set to On to activate the real-time alarm on the first day of each month.
Set the time at which the alarm becomes active.
If is set to On, the
Every hour
alarm is activated at the same time every hour (determined by the
setting) or on the hour (if
Set the duration for the alarm to remain active.
Set to On to add an entry to the Alarm Event log each time the real-time
alarm becomes active.
setting cannot be adjusted and the
Hours
is set to Off).
Minutes
7 Configuration
Minutes
OI/RVG200-EN