Archiving; Introduction - ABB ScreenMaster RVG200 Operating Instructions Manual

ScreenMaster RVG200
Paperless recorder

6 Archiving

6.1 Introduction

Recorded data, logs and configuration files stored in the recorder's internal memory can be archived in
binary encoded format to:

SD Card

USB flash drive in either the front or rear USB ports

Internal memory
Archiving is configured in the Common configuration level – see Section 7.7.2, page 70.
The following icons are displayed in the Status bar to indicate archiving status:
Archive media online (green icon, number indicates % used)
–
Do not remove external media while online
– Archive media offline (grey icon)
– Archive media 100 % full, archiving stopped (green icon, flashing red cross)
The Instrument Status screen indicates the storage media type in use and displays the approximate
amount of free space remaining, assuming the amount of data recorded remains the same.
Note. To avoid loss of archive data,
selection (see Section 7.7.2, page 70) or removing external archive media. Set logging off-line by
touching in the Logging menu.
Caution. Electrostatic precautions for SD cards.
To avoid potential damage or corruption to data recorded on an SD card, take care when handling and
storing the card. Do not expose the card to static electricity, electrical noise or magnetic fields. When
handling the card take care not to touch any exposed metal contacts.
54
set logging off-line
always
changing the storage media type
before
6 Archiving
OI/RVG200-EN