Electronic Signatures - ABB ScreenMaster RVG200 Operating Instructions Manual

ScreenMaster RVG200
Paperless recorder

4.8 Electronic signatures

Entering an electronic signature is the equivalent to signing the chart of a conventional paper recorder.
Local procedures may require the approval of a record by an authorized signatory; for this reason, an
electronic signature is password protected.
Select Operator
Operator 1
Operator 2
Create a new signature
Select one of 7 previously
defined signatures
(see below)
Note
If more than one
process group is
enabled (see
Section 7.7.1,
page 68), assign the
signature to one or
more groups
Fig. 4.12 Entering an electronic signature
Note. Up to 7 electronic signatures can be stored in the recorder's memory. If 7 signatures exist and a
new one is created, the oldest is overwritten.
48
Electronic Signature
<New Signature>
Signature Text 1
or...
Signature Text 2
Signature Text 3
Signature Text 4
Signature Text 5
Signature Text 6
Signature Text 7
Assign to Group :
1 Process Group 1
2. Process Group 2
3. Process Group 3
4. Process Group 4
Operator 1 – Enter Password
Change Password
Enter Password
(see Section 5.1.1, page 51)
<New Signature>
Create new signature or
edit an existing one.
Electronic signature is entered into alarm log.
If operator message annotation is enabled
(see page 82), the electronic signature is also
displayed on the chart.
4 Operation
Invalid
Password
Entered
Valid
Password
Entered
OI/RVG200-EN