Configuring The Chart Display - ABB SM2000 User Manual

...4 CONFIGURATION

4.5.2 Configuring the Chart Display

Scale Bar
Chart Trace
Time Stamp
Operator Message
Annotation
Alarm Event
Annotation
Chart
Bar Process
Recording
Chart view enable
Chart annotation
Major chart divisions
Minor chart divisions
42
Major Chart Divisions
Group 1
Level Pressure
2.08 4
metres bar
0
12:00:00
11:59:15
11:58:30
11:57:45
Chart Divisions
Process Group 1
Digital Archive
Vertical
None
4
0
Minor Chart Divisions
In Flow Out Flow Temp
204.9 198.9 195
l/hr l/hr
12:00:30 High Out Flow Rate
11:58:53 Duty/Standby Switched
11:58:00 High Level
Screen Interval
Select the Horizontal or Vertical chart view.
Select the annotations displayed on the chart. Alarm events
and operator messages are displayed on the chart adjacent
to the point at which the alarm occurred – see Section 2.3.
This initial setting can be changed by the operator if 'Chart
annotation select enable' is enabled in the Chart view menu
enables – see 'Menu Enables' overleaf.
Set the number of major vertical divisions to be displayed on
the scale bar and the chart.
Set the number of minor vertical divisions to appear between
the major chart divisions on the scale bar.
28/03/00
12:00:45
Alarm 1
On
°C
10
Screen Interval
28/03/00
12:00:45
Level
2.08
metres
Pressure
4
bar
In Flow
204.9
l/hr
Out Flow
198.9
l/hr
Alarm 1
On