Users - ABB ScreenMaster RVG200 Operating Instructions Manual

ScreenMaster RVG200
Paperless recorder

7.7.6 Users

Note.

User 1 is the System Administrator and is able to change user names / access privileges and enter
initial passwords for all other users.

if
Security system
change their user name, password and access privileges.

if
Security system
user names and access privileges once set by User 1, but all users may change their own
passwords.

The following parameters are displayed only if
page 74.
User
User 1
User 2 (to 4)
Name
Password
Access
76
is set to Basic (see Section 7.7.5, page 74) other users (if enabled by User 1) can
is set to Advanced (see Section 7.7.5, page 74), other users cannot change their
Enter a name and password for User 1.
Note. User 1 only is able to access this parameter.
User 1 can enter names and associated passwords to enable up to 3
additional users access to the Configuration level.
Note. If enabled by User 1, another user can access their associated
parameter and change the
if is set to Disabled by that user and the configuration saved, only
Access
User 1 can restore that user's access privileges.
Enter a name for the selected user.
Enter an initial password for the selected user.
Set access privileges for the selected user.
Enabled – The selected user is able to access the Configuration level.
Disabled – The selected user is unable to access the Configuration
level.
Note. When the method of access to the Configuration level is set to
Password protected (see Section 7.7.5, page 74) and a user with
Configuration level access privileges changes the recorder's
configuration, the
is set to Basic – see Section 7.7.5,
Security system
,
Name Password
of the user is included in the audit log entry.
Name
7 Configuration
and settings. However,
Access
OI/RVG200-EN