Security - ABB ScreenMaster RVG200 Operating Instructions Manual

ScreenMaster RVG200
Paperless recorder

7.7.5 Security

Note. User 1 is the System Administrator and is able to change the Security type and all other security
parameters. Other users can change only the
Basic.
Security
Security type
Security system
Configuration security
Security Options
Logging security
Acknowledge security
Logging security
Logging password
74
Logging security
Set the Security type.
Select Basic or Advanced security – see Section 7.2, page 59.
Set the method of access to the Configuration level.

If Password protected is selected, access is via the password set
for the user – see Section 7.7.6, page 76.

If Switch protected is selected, access to the Configuration level is
prohibited for all users once the changes have been saved and
made active. Access to the Configuration level is then achieved
only by setting the internal security switch to the 'Configuration
level not protected' position – see Fig. 7.3, page 62.
Note. Displayed only if
When set to On, access to the Logging level is protected by each user's
unique password.
When set to On, each user must enter their unique password in order to
acknowledge alarms.
Note. Displayed only if
When set to On, access to the Logging level is protected by a single,
4-digit password for all users.
Note. Displayed only if
security is set to On.
Enter the password to be used by all users to access the Logging level.
setting and only if
is set to Advanced.
Security system
is set to Basic.
Security system
is set to Basic
Security system
7 Configuration
is set to
Security system
Logging
and
OI/RVG200-EN