Stopping A Batch Manually; Historical Review - ABB ScreenMaster RVG200 Operating Instructions Manual

ScreenMaster RVG200
Paperless recorder
E.2.3 Stopping a batch manually
Note. A batch can be stopped only from the vertical or horizontal chart view operator menus. Touch
to open the menu.
Stop Batch
E.2.4 Historical review
If the recorder is in historical review mode, any previously recorded batch can be reviewed providing the
data is still in internal memory.

Historical Review

Select Batch
176
Touch to display the Operator menu
Note. Greyed out if batch recording has not been enabled during Group
configuration a batch is not running.
or
Touch to stop batch recording. A confirmation dialog box is displayed. Touch
to stop the batch or
Note. If
Security system
the operator has the necessary access rights (see Section E.3.2, page 177)
Operator login is set to Start and Stop (see page 178), a password entry
and
dialog box is displayed. The correct operator password must be entered to
enable the batch to be started.
Touch to display the Operator menu
Touch to display the sub-menu.
Touch to move to data recorded in the recorder's onboard memory for a
specific batch.
Select the batch to be reviewed from the list.
The data is displayed from the start of the batch.
Appendix E – Batch recording
to allow the batch to continue.
is set to Advanced (see Section E.3.1, page 177)
and
OI/RVG200-EN